Product Description:

The Bently Nevada 330908-00-90-05-02-CN is a 3300 NSv Proximity Probe used for high-precision, non-contact machinery vibration and displacement monitoring. It is for constrained industrial installations, such as small-bore small target applications, or where counterbore, sideview, or rearview restrictions limit standard sensors.The primary uses for the 3300 XL NSv Transducer System are for areas where counter bore, sideview, or rearview restrictions limit the use of standard Bently Nevada 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for small target applications, such as measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in).  

Frequently Asked Questions (FAQ)

Q:Can I use this probe with an older 3000 or 7000 series system?

A:System Upgrades: No, it is not direct-drop backward compatible without updating the associated electronics. If upgrading an old 3000 or 7000 loop, you must swap out the probe, extension cable, and the Proximitor sensor as an interconnected system.
Q:What are the main applications for the 3300 NSv series?
A:The NSv (Narrow System variant) is specifically designed for target areas with counterbore restrictions, side-view constraints, or rear-view clearances. It is widely used for monitoring small-diameter shafts, fluid-film bearings, centrifugal compressors, and tight internal machine housings.

Q:Is this probe compatible with standard Bently Nevada 8mm systems?
A:No. The 3300 NSv probe has distinct electrical and tuning characteristics compared to standard 3300 XL 8mm probes. You must match this probe with a matching 3300 XL NSv Extension Cable and 3300 XL NSv Proximitor Sensor to maintain system calibration and measurement accuracy.

If you need other brands products like below, please feel free write email to plcinfo@mooreplc.com 

You will get Best price and Professional service (24/7)

It's like having the store come to you!  

Request for Video/Picture