Bently Nevada 200151-60-03-00 accelerometer interface cable

Frequently asked questions
Q:What type of coupling nut is included?
A:This model is supplied with a standard coupling nut, identified by the "-00" option in the ordering configuration.

Q:What type of cable construction does this model have?
A:The 200151-60-03-00 uses a blue cable with armor, providing additional mechanical protection for industrial installation environments.

Q:Can the 200151-60-03-00 be used with other Bently Nevada sensors?
A:The cable should be used with compatible Bently Nevada 20015x accelerometers to maintain proper connection and system performance.

Description

The Bently Nevada 200151-60-03-00 is an Accelerometer Interface Standard Cable designed for use with the 200150, 200155, and 200157 Accelerometer series. The cable provides the electrical connection between the accelerometer and compatible monitoring equipment, allowing vibration measurement signals to be transmitted for machinery condition monitoring applications. This configuration includes a 6.0 m cable length, a blue armored cable construction, and a standard coupling nut. The armored cable design provides additional mechanical protection for installations where increased cable durability is required in industrial environments. The 200151 series interface cables are designed to maintain reliable signal transmission between Bently Nevada accelerometers and monitoring systems. When installed with compatible 20015x accelerometers, the cable supports vibration data acquisition used for machinery condition monitoring, equipment assessment, and operational analysis.

Parameter

Model: 200151-60-03-00 accelerometer interface cable   
Cable Length: 60-6.0 meters
Armor Option: 03-Blue cable with armor
Coupling Nut: 00-Standard coupling nut (see Figure 9)
Minimum Bend Radius: 63.5 mm (2.5 in)
Operating Temperature: -20°C to +100°C (-4°F to +212°F)

Application areas

• Industrial Pumps–Provides the connection between casing-mounted accelerometers and monitoring systems used for pump vibration measurement and condition monitoring.
• Compressors–Applied on compressor housings where accelerometer signals are required for continuous vibration monitoring during operation.
• Fans and Blowers–Supports vibration monitoring systems installed on fan and blower assemblies by providing reliable signal transmission from the accelerometer to the monitoring equipment.
• Gearboxes–Used with accelerometer-based monitoring systems to transmit housing vibration signals from gearbox installations.

Picture/ Video Request

It's like having the store come to you!  

Request for Video/Picture