Product Description:

The Bently Nevada 330905-00-20-05-01-00 is an eddy current proximity probe belonging to the 3300 NSv Proximity Transducer System. This system is for critical machinery with tight physical installation spaces or small shaft targets where standard 5 mm or 8 mm probes cannot fit.The primary uses for the 3300 XL NSv Transducer System are for areas where counter bore, sideview, or rearview restrictions limit the use of standard Bently Nevada 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for
small target applications, such as measuring radial vibration on shafts smaller than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in). 

Frequently Asked Questions (FAQ)

Q:Can I swap this probe into an older 3000 or 7000 series system?

A:No, you cannot partially mix components. If upgrading from legacy 3000-series or 7000-series 190 systems, you must replace the legacy probe, extension cable, and Proximitor sensor entirely with NSv-rated components to maintain loop tuning.
Q:Why does it feature a "ClickLoc" connector?
A:The gold-plated brass ClickLoc connectors explicitly lock the connection together to prevent it from loosening due to machine vibration. You should always use connector protectors on these junctions to prevent moisture or oil intrusion from altering the electrical signal.

Q:What are the main applications for this specific probe?
A:It is used on fluid-film bearing machines with small target constraints. Common setups include measuring radial vibration on shafts under 51 mm (2 inches) or axial (thrust) position on targets smaller than 15 mm (0.6 inches). It is also utilized for tachometer speed and phase reference (Keyphasor) indexing.

If you need other brands products like below, please feel free write email to plcinfo@mooreplc.com 

You will get Best price and Professional service (24/7)

It's like having the store come to you!  

Request for Video/Picture