190501-10-99-00 | Bently Nevada Velomitor CT Velocity Transducer

in stock#

Brand/ Manufacturer:
Bently Nevada
Dimensions:
8.3x3.5x3.2cm
Weight:
0.3kg
Country of Origin: :
USA
Description:
Bently Nevada 190501-10-99-00 Velomitor CT Velocity Transducer

Inquiry now

Mfr. Part Number:	190501-10-99-00

Manufacturer:	Bently Nevada

Description:	Bently Nevada 190501-10-99-00 Velomitor CT Velocity Transducer

Full Description:	The Velomitor CT Velocity Transducer is a low-frequency version of our standard Velomitor Piezo-velocity Sensor.

Status:	In stock

Click to get price : : plcinfo@mooreplc.com : +86 18020776786 : mooreplc

Moore Automation Limited is not affiliated with or a distributor for Bently Nevada. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.

Product Description:

The Bently Nevada 190501-10-99-00 is a specific configuration of the Velomitor CT velocity sensor. This is a dedicated low-frequency piezoelectric velocity sensor. The Velomitor CT velocity sensor is a low-frequency variant of the standard Velomitor piezoelectric velocity sensor. Its design is specifically for measuring the vibration velocity of the casing of cooling tower and air-cooled heat exchanger fan components, suitable for equipment with speeds not less than 90 rpm (typically 100 to 300 rpm).

Application:

Oil & Gas / Refining: Installed on critical heat-exchangers and cooling units in petroleum refining, offshore production, and petrochemical plants.
Power Generation: Used in coal-fired, combined-cycle, and geothermal power plants to monitor structural cooling assets.
Chemical & Fertilizer Plants: Protecting cooling infrastructures subjected to harsh, corrosive, and continuous processing environments.
Water & Wastewater Treatment: Monitoring heavy aeration fans and low-frequency fluid processing pumps.

Frequently Asked Questions (FAQ)

Q:What connector type does it use?
A:The transducer utilizes a standard 2-pin MIL-C-5015 top connector. The internal electronics are fully isolated from the stainless steel outer case to eliminate ground loops.
Q:Why is low-frequency calibration important for this sensor?
A:Because it operates at very low cycles per minute (down to 90 cpm or 1.5 Hz), standard shaker tables cannot accurately test it. Proper verification requires a specialized low-frequency portable vibration calibrator to account for the steep roll-off inherent to piezoelectric velocity sensors at these limits.

Q:Why does the sensor experience steep roll-off at low frequencies?
A:The sensor is designed with a specialized low-frequency cutoff. Testing or operating the unit below 90 cycles per minute (1.5 Hz) results in a steep output drop, making standard sensitivity calculations inaccurate for ultra-slow applications. You can review full technical curves on the Bently Nevada 190501 Datasheet via Instrumart.

If you need other brands products like below, please feel free write email to plcinfo@mooreplc.com

You will get Best price and Professional service (24/7)

Detailed Parameter	Part Number：190501-10-99-00
Mounting Hardware Option	Plate Stud M6x1 to M6x1with 3/8- in 24 adapter
Connection Option	MIL-C-5015 connection interface
Sensitivity	3.94 mV/mm/s (100 mV/in/s) ±5%
Temperature Sensitivity	-8% to +5% typical over the operating temperature range
Transverse Response	Less than 5% of the axial sensitivity
Output Bias Voltage	10.1 Vdc ± 1.0 Vdc
Dynamic Output Impedance	<400 Ω typical
Operating Temperature	-40°C to +85°C (-40°F to +185°F)
Storage Temperature	-40°C to +100°C (-40°F to +212°F)
Agency Approval Option	No Approvals

ADV151	DS200DCFBG1BNC	FC-TPSU-2430	SPS5710 51199929-100
F3PU20-0N	DSTD N031 3BSE013335R1	FS-TSAO-0220m	BB174 3BSE003879R1
F3SP21-0N	GJR2322600R0100 88UB01A	FC-TSAO-0220m	330425-01-CN
AS S9831DB-01	IS200EMIOH1ACA	FC-TSAOH-0220m	330130-085-03-05
SD823	146055-10-02-00	YPH105E YT204001-FC	9182/20-51-11
KJ2201X1-JA1	1900/55	YPK107E YT204001-FY	IS210AEAAH1BKE
12P3323X022	330104-00-05-05-02-05	330101-33-66-10-02-05	IS210AEPSG1AFC
KJ3202X1-BA1	330104-08-14-10-02-05	330103-02-04-30-01-00	336A4940CTP2
SLS1508 VS3202	330980-71-00	33105-02-12-05-02-00	PA1M011
KJ2002X1-CA1	57C493	330500-07-04	3VTVZ590CD001
KJ4001X1-JA1	4454-132	330104-01-08-15-02-05	DS200DSPCH1A
KJ3001X1-BB1	330180-X1-05	YPQ101E YT204001-FS	DS200VPBLG1AEE
12P0550X142 VE4001S2T2	330173-00-03-10-02-00	YPQ102E YT204001-FT	IS200EISBH1A
F3RP41-2P/L1	SL10.504	IS200TRLYH1BGF	FS-TSDO-0424
ADCV01	CI867AK01	IS200ECTBG1A	FC-TSDO-0424
KJ3203X1-BA1	330104-08-16-10-02-00	RCNA-01	DS200TCPDG1BEC
12P2506X062 VE4006P2	330173-00-04-10-02-00	DSTDW130 57160001-YX	DS200TCQCG1BJF

Picture/ Video Request
Buying equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to buy equipment aboard and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.

With video, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

Request to for the video to view the actual piece of equipment you're interested in before purchasing. You can in close to see the labels with the serial number or the overall condition of the equipment.

It's like having the store come to you!

Request for Video/Picture

Quick Quotes :
Receive price & availability FAST from our dedicated customer service team.
Delivery :

Expedited, Freight, and International shipping available.
Warranty :
If there's a problem, we'll make it right. Your satisfaction is how we measure success!
Returns :
No hassle return policy.
Repair :
Our team of engineers are creative problem solvers who understand your challenges.
Payment :
Custom Calibration :
You give us the specs and we do the rest.
Share this page :

Tweet

Share

Share

Email Us