Vibro-Meter TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000-H10 Non Contact Proximity Transducer

Frequently asked questions
Q:What is the Vibro-Meter TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000-H10?
A:The Vibro-Meter TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000-H10 is a non-contact proximity transducer designed to measure shaft relative vibration, axial position, and gap in rotating machinery. It is used with the EA402 extension cable and IQS900 signal conditioner as a complete proximity measurement system.

Q:What are the key features of this configuration?
A:This configuration includes an M10 × 1 threaded probe body, a 42 mm body length, no unthreaded section, a 1.0 m integral coaxial cable, and a 10 m total system length.

Q:What is the typical lead time for the TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000-H10?
A:Lead time varies depending on stock availability and order quantity. In-stock units are typically available for prompt shipment, while special orders may require additional procurement time.

Description

The Vibro-Meter TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000-H10 is a non-contact proximity transducer designed for accurate measurement of shaft relative vibration, axial position, and gap in rotating machinery. Operating on the eddy-current principle, it is used with the EA402 extension cable and IQS900 signal conditioner to form a complete proximity measurement system. This configuration features an M10 × 1 threaded stainless-steel body with a 42 mm body length, no unthreaded section, a 1.0 m integral coaxial cable, and a 10 m total system length. With a frequency response from DC to 20 kHz, it provides reliable, high-precision performance for continuous monitoring of steam turbines, gas turbines, hydraulic turbines, compressors, pumps, and generators.

Parameter

Model: TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000-H10 Non Contact Proximity Transducer
Mounting Thread Profile: Metric M10 × 1 thread profile
Protection / Housing Type: Standard type (Stainless-steel body)
Body Thread Length: 42 mm fully threaded section
Unthreaded Section Length: 0 mm (No unthreaded portion)
Integral Cable Length: 1.0 meter (Flexible coaxial cable attached to probe)
Cable Protection Style: Standard coaxial cable jacket (Without flexible stainless-steel armor)
Connector/Termination Option: Standard miniature coaxial connector
Total System Calibration: Calibrated for a 10-meter total system length (Probe + Cable)

Application areas

The Vibro-Meter TQ402 S3960 A1-B1-C042-D000-E010-F0-G000-H10 primary application areas for this specific configured model include:

• Boiler Feed Pumps & Cryogenic Liquid Pumps: Provides reliable non-contact vibration monitoring inside the aggressive environment of high-energy auxiliary pumps in power plants and LNG terminals.
• Main Shaft Runout Monitoring: Installed radially on the upper and lower guide bearings of Francis, Kaplan, or Pelton turbines to track eccentricity, structural misalignment, or tilt caused by hydraulic imbalance.
• Phase Reference & Speed Triggering (Keyphasor): Captures once-per-revolution pulse indicators from a shaft notch. The wide DC to 20 kHz range ensures flawless timing capture even at extreme startup or operational RPMs.

Picture/ Video Request

It's like having the store come to you!  

Request for Video/Picture