Bently Nevada 3500/22M 138607-01 Transient Data Interface Module

The 3500/22M Transient Data Interface (TDI) is the interfacebetween the 3500 monitoring system and compatiblesoftware (System 1 Condition Monitoring and Diagnosticsoftware and 3500 System Configuration software). The TDIcombines the function of a 3500/20 Rack Interface Module(RIM) with the data collection capability of a communicationprocessor such as TDXnet.

The TDI resides in the slot adjacent to the power supplies of a 3500 rack. It interfaces with M series monitors (3500/40M,3500/42M, etc.) to continuously collect steady state andtransient dynamic (waveform) data and pass this datathrough an Ethernet link to the host software. Refer to theCompatibility section at the end of this document for moreinformation

3500/22M TDI Module and I/O

3500/22-AA-BB-CC
A: Transient Data Interface Type01 Standard (use for standard monitoringapplications)
B: I/O Module Type
01 10Base-T/100Base-TX Ethernet
02 100Base-FX (Fiber Optic) Ethernet
03 10Base-T/100Base-TX Ethernet withgold-plated OK Relay contacts
04 100Base-FX (fiber optic) Ethernet withgold-plated OK Relay contacts
C: Agency Approval
00 None
01 CSA/NRTL/C (Class 1, Division 2)
02 Multi (CSA, ATEX, IECEx)

Spares

288055-01 Standard Transient DataInterface Module with USB cable
123M4610* 10 foot A to B USB cable
146031-01 10Base-T/100Base-TX I/OModule
146031-02 100Base-FX (Fiber Optic) I/OModule
161580 3500/22M TDI Operation andMaintenance User Guide
164466 Network Accessories Datasheet
00580441 Connector header, internaltermination, 3-position, green
00580436 Connector header, internaltermination, 6-position, green
111M5777 Connector header, internaltermination, 2-position, green
166M2390 Connector header, push-inspring type (alternative for PN00580436)
166M4363 Connector header, push-inspring type (alternative for PN00580441)
146031-03 10Base-T/100Base-TX I/OModule GLD Plated